Stainless Steel Sections
Atlas imports, processes and distributes a range of stainless steel bar and wire products through the Atlas Specialty Metals business. Product produced in coil form is classified as wire and product produced in length is classified as bar. Atlas undertakes primary processing at its specialty steels bar and wire facility in Melbourne, and secondary processing at its various distribution centres.
A large percentage of round bar is machine into component parts for industries such as marine, automotive household appliance and general industrial applications. The remainder of the round bar and most of the flat and shaped sections are used for structural and industrial applications. Wire is used to manufacture products such as screws, nails, springs and wire mesh.
Stainless Steel Sections
|
Round Bar: |
3.00 to 304.8mm |
|
Square Bar: |
6.00 to 76.20mm |
|
Hexagonal Bar: |
6.35 to 63.50mm A/F |
|
Flat Bar: |
12.00 to 150.00mm wide; 3.00 to 25.00mm thick |
|
Equal Angle: |
20.00 to 100.00mm wide; 3.00 to 12.00mm thick |
|
Channel: |
80.00 x 40.00mm to 150.00 x 75.00mm section; 5.0.00 to 6.00mm thick |
|
Hollow Bar: |
32.00mm OD x 16.00mm ID to 250.00mm OD x 200.00mm ID |
|
Wire: |
1.0 to 16.0mm diameter |
|
Grade: |
303, 304, 304L, 316, 316L, 321, 416, 431, 2205, 630 |
|
Condition: |
Hardened & tempered, annealed, precipitation hardened |
|
Finish: |
Cold (bright) drawn, centreless ground, hot rolled, smooth turned & polished, peeled, slit rolled edge, hot rolled annealed & pickled |
Stainless Steel Rebar
|
Size Range: |
"Arminox" cold ribbed 6.0 to 16.0mm |
|
"Durinox" hot ribbed 20.0 to 50.0mm | |
|
Other Products: |
Couplings, mesh, tie wire, dowels |
